На главную Наши проекты:
Журнал   ·   Discuz!ML   ·   Wiki   ·   DRKB   ·   Помощь проекту
ПРАВИЛА FAQ Помощь Участники Календарь Избранное RSS
msm.ru
  
    > Процесс загрузки, лог, модификация процесса , [Verdex Pro]
      Судя по полученному логу, стандартная конфигурация подразумевает полную комплектацию периферии: BlueTooth, Audio in/out и пр.. Безусловно, это нужно будет и можно изменить по желанию, но об этом позже..

      Лог захватывает как загрузку, так и гашение процессов.
      Цитата Verdex
      reboot

      Broadcast message from root (ttyS0) (Thu Jan 1 00:06:54 1970):


      The system is going down for reboot NOW!

      root@gumstix-custom-verdex:/var$ INIT: Switching to runlevel: 6
      INIT: Sending processes the TERM signal
      INIT: Sending processes the KILL signal
      Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 604).
      dropbear.
      Stopping Bluetooth subsystem: hidd pand dund rfcomm hid2hci hcid hciattach.
      Stopping HTTP server: boaStopping system message bus: dbus.
      Stopping ntpd: stopped process in pidfile `/var/run/ntp.pid' (pid 626).
      done
      Stopping syslogd/klogd: stopped syslogd (pid 634).
      stopped klogd (pid 636).
      done
      ALSA: Storing mixer settings...
      /usr/sbin/alsactl: save_state:1253: No soundcards found...
      Deconfiguring network interfaces... cat: /var/run/udhcpc.eth0.pid: No such file or directory
      cat: /var/run/udhcpc.eth0.pid: No such file or directory
      done.
      Stopping bonjour: stopped /usr/sbin/mdnsd (pid 721).

      Stopping Vixie-cron.
      Stopping i2c...
      Sending all processes the TERM signal...
      Sending all processes the KILL signal...
      hwclock: Could not access RTC: No such file or directory
      Unmounting remote filesystems...
      Deactivating swap...
      Unmounting local filesystems...
      umount2: Device or resource busy
      umount: tmpfs busy - remounted read-only
      Rebooting... Restarting system.



      U-Boot 1.2.0 (May 10 2008 - 21:22:03) - PXA270@600 MHz - 1604


      *** Welcome to Gumstix ***


      DRAM: 128 MB

      Flash: 32 MB

      Using default environment


      Hit any key to stop autoboot: 2 1 0

      Instruction Cache is ON

      Copying kernel to 0xa2000000 from 0x01f00000 (length 0x00100000)...done

      ## Booting image at a2000000 ...

      Image Name: Angstrom/2.6.21/gumstix-custom-v

      Image Type: ARM Linux Kernel Image (uncompressed)

      Data Size: 1030044 Bytes = 1005.9 kB

      Load Address: a0008000

      Entry Point: a0008000

      OK


      Starting kernel ...


      Linux version 2.6.21 (otto@otto) (gcc version 4.1.2) #1 Mon May 12 10:24:19 PDT 2008
      CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f
      Machine: The Gumstix Platform
      Memory policy: ECC disabled, Data cache writeback
      Run Mode clock: 208.00MHz (*16)
      Turbo Mode clock: 624.00MHz (*3.0, active)
      Memory clock: 104.00MHz (/2)
      System bus clock: 104.00MHz
      CPU0: D VIVT undefined 5 cache
      CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
      CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
      Built 1 zonelists. Total pages: 32512
      Kernel command line: console=ttyS0,115200n8 root=1f01 rootfstype=jffs2 reboot=cold,hard
      PID hash table entries: 512 (order: 9, 2048 bytes)
      Console: colour dummy device 80x30
      Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
      Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
      Memory: 128MB = 128MB total
      Memory: 127744KB available (1808K code, 196K data, 148K init)
      Mount-cache hash table entries: 512
      CPU: Testing write buffer coherency: ok
      NET: Registered protocol family 16
      NET: Registered protocol family 2
      Time: pxa_timer clocksource has been installed.
      IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
      TCP established hash table entries: 4096 (order: 3, 32768 bytes)
      TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
      TCP: Hash tables configured (established 4096 bind 4096)
      TCP reno registered
      JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
      io scheduler noop registered
      io scheduler cfq registered (default)
      Console: switching to colour frame buffer device 80x24
      pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
      pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
      pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
      Probing Gumstix Flash ROM at physical address 0x00000000 (16-bit bankwidth)
      Gumstix Flash ROM: Found 1 x16 devices at 0x0 in 16-bit bank
      Intel/Sharp Extended Query Table at 0x010A
      Intel/Sharp Extended Query Table at 0x010A
      Intel/Sharp Extended Query Table at 0x010A
      Intel/Sharp Extended Query Table at 0x010A
      Intel/Sharp Extended Query Table at 0x010A
      Using buffer write method
      cfi_cmdset_0001: Erase suspend on write enabled
      Using static partitions on Gumstix Flash ROM
      Creating 3 MTD partitions on "Gumstix Flash ROM":
      0x00000000-0x00040000 : "Bootloader"
      0x00040000-0x01f00000 : "RootFS"
      0x01f00000-0x02000000 : "Kernel"
      TCP cubic registered
      NET: Registered protocol family 1
      NET: Registered protocol family 17
      XScale iWMMXt coprocessor detected.
      VFS: Mounted root (jffs2 filesystem).
      Freeing init memory: 148K
      INIT: version 2.86 booting
      Starting the hotplug events dispatcher udevd
      Synthesizing the initial hotplug events
      Remounting root file system...
      gumstix_smc91x_init: smc91x chip not found, returning -ENXIO
      smc91x: Unknown symbol gumstix_smc91x_load
      eth0: LAN9117 (rev 2) at 0xc8870000 IRQ 131
      eth0: Ethernet addr: 00:15:c9:10:13:d0
      Bluetooth: Core ver 2.11
      NET: Registered protocol family 31
      Bluetooth: HCI device and connection manager initialized
      Bluetooth: HCI socket layer initialized
      Bluetooth: L2CAP ver 2.8
      Bluetooth: L2CAP socket layer initialized
      Bluetooth: HIDP (Human Interface Emulation) ver 1.2
      usbcore: registered new interface driver usbfs
      usbcore: registered new interface driver hub
      usbcore: registered new device driver usb
      pxa27x-ohci pxa27x-ohci: PXA27x OHCI
      pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
      pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
      usb usb1: configuration #1 chosen from 1 choice
      hub 1-0:1.0: USB hub found
      hub 1-0:1.0: 3 ports detected
      Not netCF-vx board: using newer GPIO configuration
      CPLD responded with: ff
      Bluetooth: RFCOMM socket layer initialized
      Bluetooth: RFCOMM TTY layer initialized
      Bluetooth: RFCOMM ver 1.8
      root: mount: special device /dev/hda1 does not exist
      root: mount: special device /dev/mmcblk0p1 does not exist
      root: mount: special device /dev/sda1 does not exist
      Setting up IP spoofing protection: rp_filter.
      Configuring network interfaces... eth0: link down
      eth0 no wireless extensions.

      udhcpc (v1.2.1) started
      udhcpc[575]: udhcpc (v1.2.1) started

      Sending discover...
      udhcpc[575]: Sending discover...

      Sending discover...
      udhcpc[575]: Sending discover...

      Sending discover...
      udhcpc[575]: Sending discover...

      No lease, failing.
      udhcpc[575]: No lease, failing.

      done.
      Nothing to be done
      INIT: Entering runlevel: 5
      Starting Dropbear SSH server: dropbear.
      Starting HTTP server: boagethostbyname:: Resource temporarily unavailable
      Starting system message bus: dbus.
      Starting ntpd: done
      Starting syslogd/klogd: done
      Starting 32kHz clock...Settled
      Starting Bluetooth subsystem:
      Trying baud rate 921600...
      No response after reset
      No response from BT module
      Trying baud rate 921600...
      No response after reset
      No response from BT module
      Trying baud rate 115200...
      No response after reset
      No response from BT module
      Trying baud rate 57600...
      No response after reset
      No response from BT module
      Can't initialize device: Success
      ALSA: loading sound modules...
      ASoC version 0.13.0
      AC97 SoC Audio Codec 0.6
      asoc: AC97 HiFi <-> pxa2xx-ac97 mapping ok
      pxa2xx_ac97_cold_reset: cold reset timeout (GSR=0x0)
      pxa2xx_ac97_read: read error (ac97_reg=7c GSR=0x444)
      pxa2xx_ac97_read: read error (ac97_reg=7e GSR=0x444)
      AC'97 0 access is not valid [0xffffffff], removing mixer.
      soc-audio: probe of soc-audio failed with error -5
      ALSA: Restoring mixer settings...
      /usr/sbin/alsactl: load_state:1329: No soundcards found...
      Running ntpdate to synchronize clockError : Temporary failure in name resolution
      .
      Starting bonjour:
      Starting Vixie-cron.
      Starting i2c...
      tsc2003 i2c touch screen controller
      tsc2003_i2c_detect: probing address 0x48
      input: tsc2003 as /class/input/input0
      tsc2003 - registering input device
      tsc2003_i2c_detect: device address 0x48 attached.
      I2C: i2c-0: PXA I2C adapter
      tsc2003 i2c touch screen controller
      i2c: error: timeout
      i2c: msg_num: 1 msg_idx: 0 msg_ptr: 0
      i2c: ICR: 000007e9 ISR: 00000004
      i2c: log:
      tsc2003_i2c_detect: probing address 0x48
      i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
      i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
      i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
      i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
      i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
      i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
      i2c: error: exhausted retries
      i2c: msg_num: 1 msg_idx: 0 msg_ptr: 0
      i2c: ICR: 000007e9 ISR: 00000004
      i2c: log:
      I2C: i2c-1: PXA I2C adapter
      i2c /dev entries driver

      OpenEmbedded Linux gumstix-custom-verdex ttyS0

      Angstrom 2007.9-test-20080512 gumstix-custom-verdex ttyS0

      gumstix-custom-verdex login:
      0 пользователей читают эту тему (0 гостей и 0 скрытых пользователей)
      0 пользователей:


      Рейтинг@Mail.ru
      [ Script execution time: 0,0182 ]   [ 16 queries used ]   [ Generated: 23.04.24, 09:52 GMT ]