Версия для печати
Нажмите сюда для просмотра этой темы в оригинальном формате
Форум на Исходниках.RU > Gumstix > Процесс загрузки, лог, модификация процесса


Автор: SVK 18.01.10, 20:05
Судя по полученному логу, стандартная конфигурация подразумевает полную комплектацию периферии: BlueTooth, Audio in/out и пр.. Безусловно, это нужно будет и можно изменить по желанию, но об этом позже..

Лог захватывает как загрузку, так и гашение процессов.
Цитата Verdex
reboot

Broadcast message from root (ttyS0) (Thu Jan 1 00:06:54 1970):


The system is going down for reboot NOW!

root@gumstix-custom-verdex:/var$ INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal
Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 604).
dropbear.
Stopping Bluetooth subsystem: hidd pand dund rfcomm hid2hci hcid hciattach.
Stopping HTTP server: boaStopping system message bus: dbus.
Stopping ntpd: stopped process in pidfile `/var/run/ntp.pid' (pid 626).
done
Stopping syslogd/klogd: stopped syslogd (pid 634).
stopped klogd (pid 636).
done
ALSA: Storing mixer settings...
/usr/sbin/alsactl: save_state:1253: No soundcards found...
Deconfiguring network interfaces... cat: /var/run/udhcpc.eth0.pid: No such file or directory
cat: /var/run/udhcpc.eth0.pid: No such file or directory
done.
Stopping bonjour: stopped /usr/sbin/mdnsd (pid 721).

Stopping Vixie-cron.
Stopping i2c...
Sending all processes the TERM signal...
Sending all processes the KILL signal...
hwclock: Could not access RTC: No such file or directory
Unmounting remote filesystems...
Deactivating swap...
Unmounting local filesystems...
umount2: Device or resource busy
umount: tmpfs busy - remounted read-only
Rebooting... Restarting system.



U-Boot 1.2.0 (May 10 2008 - 21:22:03) - PXA270@600 MHz - 1604


*** Welcome to Gumstix ***


DRAM: 128 MB

Flash: 32 MB

Using default environment


Hit any key to stop autoboot: 2 1 0

Instruction Cache is ON

Copying kernel to 0xa2000000 from 0x01f00000 (length 0x00100000)...done

## Booting image at a2000000 ...

Image Name: Angstrom/2.6.21/gumstix-custom-v

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 1030044 Bytes = 1005.9 kB

Load Address: a0008000

Entry Point: a0008000

OK


Starting kernel ...


Linux version 2.6.21 (otto@otto) (gcc version 4.1.2) #1 Mon May 12 10:24:19 PDT 2008
CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f
Machine: The Gumstix Platform
Memory policy: ECC disabled, Data cache writeback
Run Mode clock: 208.00MHz (*16)
Turbo Mode clock: 624.00MHz (*3.0, active)
Memory clock: 104.00MHz (/2)
System bus clock: 104.00MHz
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists. Total pages: 32512
Kernel command line: console=ttyS0,115200n8 root=1f01 rootfstype=jffs2 reboot=cold,hard
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 127744KB available (1808K code, 196K data, 148K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
NET: Registered protocol family 2
Time: pxa_timer clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 80x24
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
Probing Gumstix Flash ROM at physical address 0x00000000 (16-bit bankwidth)
Gumstix Flash ROM: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Using static partitions on Gumstix Flash ROM
Creating 3 MTD partitions on "Gumstix Flash ROM":
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x01f00000 : "RootFS"
0x01f00000-0x02000000 : "Kernel"
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
XScale iWMMXt coprocessor detected.
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 148K
INIT: version 2.86 booting
Starting the hotplug events dispatcher udevd
Synthesizing the initial hotplug events
Remounting root file system...
gumstix_smc91x_init: smc91x chip not found, returning -ENXIO
smc91x: Unknown symbol gumstix_smc91x_load
eth0: LAN9117 (rev 2) at 0xc8870000 IRQ 131
eth0: Ethernet addr: 00:15:c9:10:13:d0
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pxa27x-ohci pxa27x-ohci: PXA27x OHCI
pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Not netCF-vx board: using newer GPIO configuration
CPLD responded with: ff
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
root: mount: special device /dev/hda1 does not exist
root: mount: special device /dev/mmcblk0p1 does not exist
root: mount: special device /dev/sda1 does not exist
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... eth0: link down
eth0 no wireless extensions.

udhcpc (v1.2.1) started
udhcpc[575]: udhcpc (v1.2.1) started

Sending discover...
udhcpc[575]: Sending discover...

Sending discover...
udhcpc[575]: Sending discover...

Sending discover...
udhcpc[575]: Sending discover...

No lease, failing.
udhcpc[575]: No lease, failing.

done.
Nothing to be done
INIT: Entering runlevel: 5
Starting Dropbear SSH server: dropbear.
Starting HTTP server: boagethostbyname:: Resource temporarily unavailable
Starting system message bus: dbus.
Starting ntpd: done
Starting syslogd/klogd: done
Starting 32kHz clock...Settled
Starting Bluetooth subsystem:
Trying baud rate 921600...
No response after reset
No response from BT module
Trying baud rate 921600...
No response after reset
No response from BT module
Trying baud rate 115200...
No response after reset
No response from BT module
Trying baud rate 57600...
No response after reset
No response from BT module
Can't initialize device: Success
ALSA: loading sound modules...
ASoC version 0.13.0
AC97 SoC Audio Codec 0.6
asoc: AC97 HiFi <-> pxa2xx-ac97 mapping ok
pxa2xx_ac97_cold_reset: cold reset timeout (GSR=0x0)
pxa2xx_ac97_read: read error (ac97_reg=7c GSR=0x444)
pxa2xx_ac97_read: read error (ac97_reg=7e GSR=0x444)
AC'97 0 access is not valid [0xffffffff], removing mixer.
soc-audio: probe of soc-audio failed with error -5
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1329: No soundcards found...
Running ntpdate to synchronize clockError : Temporary failure in name resolution
.
Starting bonjour:
Starting Vixie-cron.
Starting i2c...
tsc2003 i2c touch screen controller
tsc2003_i2c_detect: probing address 0x48
input: tsc2003 as /class/input/input0
tsc2003 - registering input device
tsc2003_i2c_detect: device address 0x48 attached.
I2C: i2c-0: PXA I2C adapter
tsc2003 i2c touch screen controller
i2c: error: timeout
i2c: msg_num: 1 msg_idx: 0 msg_ptr: 0
i2c: ICR: 000007e9 ISR: 00000004
i2c: log:
tsc2003_i2c_detect: probing address 0x48
i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
i2c_adapter i2c-1: i2c_pxa: timeout waiting for bus free
i2c: error: exhausted retries
i2c: msg_num: 1 msg_idx: 0 msg_ptr: 0
i2c: ICR: 000007e9 ISR: 00000004
i2c: log:
I2C: i2c-1: PXA I2C adapter
i2c /dev entries driver

OpenEmbedded Linux gumstix-custom-verdex ttyS0

Angstrom 2007.9-test-20080512 gumstix-custom-verdex ttyS0

gumstix-custom-verdex login:

Powered by Invision Power Board (https://www.invisionboard.com)
© Invision Power Services (https://www.invisionpower.com)